Sunday, July 1, 2012

Knock-off Skirt



A few weeks ago I came across this skirt: Inspiration Skirt  She does amazing work that looks great and I wish I could afford a $115 skirt, but I can't. So, I set out to see if I could make my own version. First I randomly stumbled across the fabric at Ikea- they also had the blue and green stripe. I bought a yard (which would later cause some issues...I will get to that) and then went home to search my patterns for a pleated skirt. I found a McCalls pattern that I thought would work: 5591 view C. It may have worked out great but when I went to cut it out, the pattern required way more fabric then what I had to create the horizontal stripe. So...I brainstormed a little and thought I could maybe fiddle around with what I had and create a skirt with smaller pleats. I sketched out a pattern using the skirt pattern I had as a guide and here are the steps I followed...there were some bumps along the way, so please read through the entire post to see where you may want to change things if you create the skirt. Also...my advice would be to follow the pattern referenced above if you want all the steps laid out in a professional way and you would like to follow a pattern. Whatever you choose, if you create it, I would love to see it! Good luck.

Step 1: Create your pattern
- Cut out a skirt front and back (on the fold) using a pattern you have or trace a similar cut skirt, making sure your stripes are running horizontally. Since my fabric was not wide enough for the deeper pleats I simply lined up the pattern from 5591 with the fabric piece I had and cut out what I could. My skirt piece ended up being approximately a 22 inch by 16 inch rectangle (on the fold...so 22 inches long by 32 inches wide when unfolded). Then I took the waistband from pattern 5591 and cut it out. You could also take a pattern of your choice or trace out a simple rectangular piece for the waistband. **If you use pattern 5591 do NOT make the silly mistake I did. If you notice my waistband is solid fabric- not the stripe. This is because I ran out of fabric from cutting the waistband according to the pattern...which is for a back zip skirt. I wanted a side zip skirt. To get around this problem, simply cut 4 of the "front waistband" pattern pieces on the fold and sew the short ends together to create a waistband. Then repeat with the remaining two pieces and you now have your waistband facing.

2. Mark the center of each front and back skirt piece with a pin. We are now going to create the pleats. Because I did not have much fabric, my pleats are smaller. If you have more fabric you can create a deeper pleat. From the center pin marking, measure out 2 inches on each side and place a pin to mark. Bring the outer pins to the center pin to create a pleat. It should look like this:
3. Next, measure 7 inches from your pleat on each side and place a pin. This is the center mark of your other two pleats. Measure 2 inches from each side of these two marks and pin. Bring the pins to the center pin to create two more pleats. Your finished back and front should look like this:
4. Baste your pleats in place by stitching 1/4 inch from the top edge over each pleat. Give the pleats a good pressing.

5. Pin ONE side of your skirt front and back together, right sides facing. To help make sure the stripes are lined up, place a pin every time the stripes meet. This will help prevent shifting. Prior to stitching the skirt front and back together I finished off the edges with my serger.

6. Next create the waistband by stitching 2 short sides, right sides together, to create one waistband. Repeat with the other 2 pieces to create the waistband facing. Take one of the waistband pieces and pin it, right sides together, to the top edge of the skirt, lining up side seams and stitch. Then insert your invisible zipper. After the invisible zipper is inserted, stitch the side seam, right sides together, on the zipper side of the skirt from the bottom of the zipper to the bottom edge of the skirt.
7. Fold in 1/4 inch towards the wrong side of the waistband facing and press. Then, pin the waistband facing (using the non-pressed edge) to the top edge of the waistband, right sides together and stitch (sorry no pics of this part). Turn the waistband right sides out and press to create a waistband sandwich...you should have the raw top edge of the skirt in the middle of the sandwich. The 1/4 inch pressed edge will cover it. Pin and make sure your skirt waistband lines up in both front and back along the top edge of the skirt piece. You will now topstitch on the waistband to stitch the waistband "sandwich" together and to create a finished look. I stitch this on the right side of the fabric to insure I am stitching a straight line. Sometimes I miss catching all the fabric on the backside if I wasn't careful when pinning. I go back and hand stitch anything that was left out and I also hand stitch the facing to the zipper.
8. Finally, fold up the desired hem length and stitch the hem. You are done! Press your skirt well and enjoy.

And a special thanks to one of my beautiful sister-in-laws for playing model :)

Shannon

17 comments:

  1. Wow! I wish I was more talented in the sewing area! So neat!

    six-cents.com

    ReplyDelete
    Replies
    1. Thank you Aimee- I am sure you could tackle sewing...hope you give it a try!
      Shannon

      Delete
  2. I'm your newest follower! This skirt is super cute. I pinned it to pinterest and will be making it as soon as I get out of these maternity clothes! Thanks for sharing.

    Jessica
    www.sewingourlifetogether.blogspot.com

    ReplyDelete
    Replies
    1. Thank you Jessica and thanks for following along- It is always so hard looking at non-maternity things while you are in maternity clothes...I know how that goes :) Shannon

      Delete
  3. What a darling skirt!! I love those wide stripes with the pleats! It turned out great!
    Thank you for linking up to Think Pink Sunday - I featured you today! http://www.flamingotoes.com/2012/07/crush-of-the-week-think-pink-features-56/

    ReplyDelete
  4. I knew the skirt you were referencing the minute I opened this post...I love it! Your version looks amazing! Kudos!!

    ReplyDelete
    Replies
    1. Thank you for your sweet comment and for stopping by the blog :)
      Shannon

      Delete
  5. Great job on recreating the skirt!! Practically identical! :)

    Princess M.

    ReplyDelete

We love hearing from you. We read each and every comment and try our best to respond to them all as well. Thank you so much for leaving us a note :)

Note: Only a member of this blog may post a comment.